Summary
Polymeric nanocomposites of polystyrene nanofibers and multiwall carbon nanotubes and pure pigment have been synthesized utilizing electrospinning approach the polystyrene focus was 12 wt.% and multiwall carbon nanotube was added by (0, 100, 140, 200 ppm), and pure pigment added by two drops (0.063 g) to the ready options and lots of assessments have been carried out to the ready options and the ultimate samples. The answer assessments included viscosity check through the use of cone-plate viscometer and floor pressure check utilizing du-nouy ring technique. The nano textiles assessments included the Fourier remodel infrared spectroscope (FTIR) check, Subject emission scanning electron microscopy (FESEM) check, contact angle check, and ultraviolet check to extract the power bandgap utilizing (tauc plot) technique. The assessments outcomes confirmed that the viscosity elevated by rising the multiwall carbon nanotube and pure pigment and floor pressure barely elevated at a excessive ratio of 200 ppm of multiwall carbon nanotube and pure pigment and bodily kind of response between the elements have been confirmed by FTIR, and the addition of multiwall carbon nanotube and pure pigment makes the fibers smoother and fewer beads formation and improve the multiwall carbon nanotube addition made the samples extra hydrophobic and the charts of tauc plot present that rising the MWCNT with pure pigment addition will improve {the electrical} sensitivity of the ready samples through which the power band hole dropped from 1.18 ev to 0.2 ev for the pattern of Polystyrene/200 ppm MWCNT/pure pigment that is considered a sign of utilizing it as a typical electrical sensor.
