Nanotechnology

Analysis on the progressive pretreatment to enhance the adhesion and efficiency of diamond coatings: Fullerenes, Nanotubes and Carbon Nanostructures: Vol 30, No 10

Written by admin


Summary

So as to enhance the standard of diamond coatings, this paper mixed the chemical etching and buffer layers to take care of cemented carbide with cobalt (Co) content material of 8%. Diamond coatings have been ready with scorching filament chemical vapor deposition (HFCVD). The floor morphology, high quality and put on property have been explored by utilizing scanning electron microscopy, X-ray diffraction, laser Raman spectrometer, and friction and put on tester. In comparison with the pattern with no pretreatment, samples after pretreatment have higher floor morphology. There are not any apparent impurities as effectively. Diamond crystals are uniform and compact. Friction and put on take a look at indicated that the friction coefficient is decrease than 0.1. Samples after pretreatment are a lot decrease and regular amongst them. The pattern utilizing tungsten(W)-molybdenum(Mo) layer has the perfect floor morphology and the bottom friction coefficient. The consequence reveals that the pretreatment mixed the chemical etching and buffer layers can not solely act because the diffusion barrier, but in addition can enhance the adhesion between substrate and diamond coatings. The impact of composite buffer layer is healthier than single metallic buffer layers.

About the author

admin

Leave a Comment